Horizontal Milling

The supporting structure is particularly sturdy and consist of modules of pearlitic GG-26 cast iron; they are largely dimensioned and strongly ribbed.

  • Support arm for head .
  • Electrical equipment on a panel easily inspectionable and executed following the international laws
  • Cutter arbor with fixing tie rod and relative support rest/s
  • Centralised lubrication for ways and screws by manual pump.
  • Coolant plant with electropump
  • Safety device for stopping movements in case of overload
  • Prevention protections with micro-switch.
  • All machines are in conformity with CE regulations
TypeTmax
°C
Capacity
litre
Ext dimension
(wxhxd) mm
Int dimension
(wxhxd) mm
Power
kW
Voltage
Volt
Weight
kg

Universal Milling

This milling machines uses a special high-strength gray cast iron produced by the Meehanite process and whose physical and chemical properties provide low damping capacity, high modulus of elasticity, and excellent wear characteristics.

  • Swivel table + 45°
  • ·  3 axis rapid traverse
  • Flood coolant system
  • Spindle brake
  • Low voltage controls
  • Auto lubrication system
  • Pendant controls.
  • Climb milling control
  • Variable feeds in 3 axis
  • Hardened and ground ways
  • All machines are in conformity with CE regulations
TypeTmax
°C
Capacity
litre
Ext dimension
(wxhxd) mm
Int dimension
(wxhxd) mm
ShelvesPower
kW
Voltage
Volt
Weight
kg

Vertical Milling

High precision and manoeuvrability are the main qualities of our turret milling machines. They have been constructed with the most advanced technologies and with peculiar attention in the use of materials.

  • High speed head with speed variator .
  • Manual axis feeds
  • Prismatic slideways with scraped planes
  • Slideways protection by special scrapers
  • Centralised lubrication for ways and screws by manual pump.
  • Spindle start/stop pushbutton incorporated in the head
  • Coolant plant with electropump
  • Chip tray
  • Prevention protections with micro-switch.
  • Tie rod
  • All machines are in conformity with prevailing VDE and CE regulations

Optional

  • Mechanical feeds for independent longitudinal, transversal or vertical axis (feeds n° 8 from

20 – 550mm/min ; rapid 850 – 750mm/min; power 0.37 kW).

  • Electronic feeds for independent longitudinal, transversal or vertical axis
  • Ballscrews
  • Hardened slideways
  • Pneumatic tool locking.
  • Digital readout on 2, 3 or 4 axes
  • Devices for special milling (at right angle or multiangular)
  • Automatic centralized lubrication of slideways
  • Slideways protection bellows.
  • Dividers, vices, boring head, etc.
  • All machines are in conformity with prevailing VDE and CE regulations
TypeTmax
°C
Capacity
litre
Ext dimension
(wxhxd) mm
Int dimension
(wxhxd) mm
ShelvesPower
kW
Voltage
Volt
Weight
kg

Gas Tight

These tempering furnaces are designed for industrial and glass technologies especially for tempering,  artificial ageing, hardening, preheating, heat treatment, glass aftercooling, normalising and etc

This type of furnaces are suitable for heat treatment of materials in controlled atmosphere (argon, nitrogen, forming gas etc) with low gas drain.

      • Max. temperature of 900°C
      • Overpressure cooling
      • Isolated by insulation fire bricks and micro porous panels
      • Gas tight retort
      • Optimum temperature uniformity in internal chamber space according to DIN 17052-1
      • Manually opened door
      • Heating on side and bottom
      • Engine with extended shaft for internal air circulation of furnace
      • Door isolated by silicon sealing
      • Manually operated protective atmosphere inlet
TypeTmax
°C
Capacity
litre
Ext dimension
(wxhxd) mm
Int dimension
(wxhxd) mm
ShelvesPower
kW
Voltage
Volt
Weight
kg

Top Loading

These chamber furnaces are designed for industrial and glass technologies especially for tempering,  artificial ageing, hardening, preheating, heat treatment, glass aftercooling, normalising and etc

  • Max. temperature of 650°C and 850°C
  • Air circulation by circulation inserts
  • Horizontal air circulation
  • Insulation by mineral fibre isoblocks
  • Optimum temp. uniformity DIN 17052-1
  • Door opening backwards by pneumatic cylinders
  • According to CE standard
TypeTmax
°C
Capacity
litre
Ext dimension
(wxhxd) mm
Int dimension
(wxhxd) mm
ShelvesPower
kW
Voltage
Volt
Weight
kg

Dryers

This type of industrial dryers are suitable for various applications eg. Deformation, drying, polymerisation, vulcanisation of materials, curing of surface layers, granulate drying, burning-in electrical components and preheating of various materials.

  • Max. temperature of 250°C and 450°C
  • Horizontal circulation of internal atmosphere
  • Inner lining made of heat-resistant stainless steel
  • Optimum temp. uniformity of + 5K in accordance to DIN 17052-1
  • Door safety switch
TypeTmax
°C
Capacity
litre
Ext dimension
(wxhxd) mm
Int dimension
(wxhxd) mm
ShelvesPower
kW
Voltage
Volt
Weight
kg