Circular Sawing

This type of small sawing machine is designed for cutting metal. Can be used as a bench model or mounted on steel base and cuts from 45° right up to 45° left.

  • Bronze gear and case-hardened/grounded worm screw which work immersed in oil.
  • Electric submerged pump at 24V for lubrication and cooling of the blade.
  • Adjustable cut to measure stop to make cuts of the same length.
  • All machines are in conformity with CE regulations
TypeTmax
°C
Capacity
litre
Ext dimension
(wxhxd) mm
Int dimension
(wxhxd) mm
Power
kW
Voltage
Volt
Weight
kg

Horizontal bandsaw

This type of bandsawing machine is designed for mitre cuts to both sides with turntable, hydraulic sawbow feed, mitres to both sides up to 45° + 30° to one side. Sawbow STOP after lifting.

  • Saw blade is protected up to cutting point.
  • Quick and easy band change
  • Auto hydraulic shuttle dual vice system
  • Variable speed system
  • Linear scale for feeding.
  • Inverter’s blade speed adjusting device and PLC control system can be programmed for multiple action
  • Electric coolant pump
  • Removable chip box
  • Band tension indicator
  • All machines are in conformity with prevailing VDE and CE regulations
TypeTmax
°C
Capacity
litre
Ext dimension
(wxhxd) mm
Int dimension
(wxhxd) mm
ShelvesPower
kW
Voltage
Volt
Weight
kg

Power Hacksaw

This type of sawing machine is designed for cutting numerous material such as wood and metal.

  • Adjustable cutting pressure.
  • Three cutting speed
  • Gears immersed in oil bath
  • All moving parts provided with bearings
  • Adjustable vice from 0° to 45°.
  • Rapid sawbow elevation
  • Independent motor pump cooling system
  • Automatic stop at the end of the cut
  • All machines are in conformity with CE regulations
TypeTmax
°C
Capacity
litre
Ext dimension
(wxhxd) mm
Int dimension
(wxhxd) mm
ShelvesPower
kW
Voltage
Volt
Weight
kg

Vertical Bandsaw

This type of bandsawing machine is designed for universal applications in the engineering industry. For cutting of almost all kinds of materials such as steel, cast iron, light and non-ferrous metals, plastics, graphite and even difficult to cut materials as well as friction cutting of thin sheet metals of steel or stainless steel.

  • Infinitely variable sawband spped range controlled by incorporated speedometer or via potentiometer with scale in operating panel.
  • Bandsaw wheels executed as disc shaped flanged wheels , easy to exchange
  • Running surface covered by plastic lining (90 Shore Hardness)
  • Manually adjustable sawband tension with band tension indicator
  • Sliding tables with manual, electrical or hydraulical feed are available.
  • The sawband is guided above and underneath the table. The upper guide is adjustable in height via handwheel for taking advantage of the maximum cutting height. A hydraulic height regulation is standard feature (except for ASH 10)
  • All machines are in conformity with prevailing VDE and CE regulations
TypeTmax
°C
Capacity
litre
Ext dimension
(wxhxd) mm
Int dimension
(wxhxd) mm
ShelvesPower
kW
Voltage
Volt
Weight
kg